 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin 700-SE Solid-State Relays Overview/Product Selection Bulletin 700-SE * * * * * * 20 A (resistive) Max. Continuous Load (Output) Current with Heat Sink 264V AC Max. Load Voltage Range 5,12, or 24V DC Control/Input Voltage Built-in Varistor Helps Absorb Most Electrical Surges Low Profile (Flat Pack) Design Quick-Connect #110 Input and #250 Output Terminals Table Of Contents Product Selection . . . . . . . . 42 Accessories . . . . . . . . . . . . . 43 Specifications . . . . . . . . . . . 44 Approximate Dimensions . . . . . . . . . . . . . 46 Input-toOutput Isolation Method Zero Cross Function LED Indicator Rated Output (Load) Max. Current and Voltage Range Rated Input Control Voltage Cat. No. Factorystocked Item (single pack) 5V DC 5 A at 100...240V AC 12V DC 24V DC 5V DC Yes 10 A at 100...240V AC 12V DC 24V DC 5V DC 20 A at 100...240V AC Phototriac No 5V DC 5 A at 100...240V AC 12V DC 24V DC 5V DC No 10 A at 100...240V AC 12V DC 24V DC 5V DC 20 A at 100...240V AC 12V DC 24V DC 12V DC 24V DC 700-SE05GZZ05 700-SE05GZZ12 700-SE05GZZ24 700-SE10GZZ05 700-SE10GZZ12 700-SE10GZZ24 700-SE20GZZ05 700-SE20GZZ12 700-SE20GZZ24 700-SE05GNZ05 700-SE05GNZ12 700-SE05GNZ24 700-SE10GNZ05 700-SE10GNZ12 700-SE10GNZ24 700-SE20GNZ05 700-SE20GNZ12 700-SE20GNZ24 Maximum load current when mounted on a heat sink. 42 Bulletin 700-SE Solid-State Relays Accessories Description Pkg. Quantity Cat. No. Factory-stocked Item Heat Sink -- Panel or DIN Rail Mount 1 700-S10 Cat No. 700-S10 Heat Sink -- Panel or DIN Rail Mount 1 700-S20 Cat No. 700-S20 DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. Cat No. 199-DR1 10 199-DR1 Refer to "Load Current Vs. Ambient Temperature Characteristics" page 45 for information about how to select the correct size of heat sink for your application ( cat. no. 700-S10, 700-S20). 43 Bulletin 700-SE Solid-State Relays Specifications Control/Input Ratings Rated Control Voltage 5V DC 12V DC 24V DC Input Impedance Operating Control Voltage Range 4...6V DC 9.6...14.4V DC 19.2...28.8V DC With Zero Cross Function 250 20% 600 20% 1.6k 20% Load/Output Ratings Applicable Load Cat. No. Continuous Load Current (Resistive) Rated Load Voltage Load Voltage Range With Heat Sink Min. 700-SE05... 700-SE10... 700-SE20... Characteristics Item Load Switching Method/Device Pick-up time Drop-out time Output ON voltage drop Output Leakage current Output VDRM VCEO (V) Output di/dt (A/uS) Output dv/dt (V/uS) Output I2t (A2S) Output Tj (C) max. Insulation resistance Dielectric strength Vibration resistance (max.) Shock resistance (max.) Ambient temperature Ambient humidity Standards Weight Operating 600 SE05GZ=100 SE10GZ & SE20 GZ =50 SE05GZ=200, SE10GZ=500, SE20GZ=100 SE05GZ =24.5, SE10GZ =60, SE20GZ =260 125 100 M min. (at 500V DC) 2,000V AC, 50/60 Hz for 1 min. 10...55 Hz, 1.5 mm double amplitude (10 G) 1,000 m/s2 (100 G) Operating: -30...80C (-22...176F) with no icing or condensation Storage: -30...100C (-22...212F) with no icing or condensation 45...85% (no condensation) UL 508, CSA C22.2 , TUV, CE Approx. 37 g 700-SE_ _ _Z... Triac 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 1.6 V (RMS) max. 5 mA max. (at 100V AC) 10 mA max. (at 200V AC) 600 SE05GN=100 SE10 GN & SE20GN =50 SE05GN =200, SE10GN =500, SE20GN =100 SE05GN =24.5, SE10GN =60, SE20GN =260 125 1 ms max. 700-SE_ _ _N... 100...240V AC 75...264V AC 0.1 A 0.1 A 0.1 A Max. 5A 10 A 20 A Without Heat Sink Min. 0.1 A 0.1 A 0.1 A Max. 5A 5A 5A 60 A (@50/60 Hz, 1 cycle) 150 A (@50/60 Hz, 1 cycle) 220 A (@50/60 Hz, 1 cycle) Max. Inrush Current Without Zero Cross Function 300 20% 800 20% Control Voltage Levels Pick-up Voltage 4V DC max. 9.6V DC max. 19.2V DC max. 1V DC min. Drop-out Voltage Cat. No. 700-SE_ _ _Z05 700-SE_ _ _Z12 700-SE_ _ _Z24 Each 5 A, 10 A, and 20 A model has 5V DC, 12V DC, and 24V DC input versions. Refer to "Load Current Vs. Ambient Temperature Characteristics" graphs page 45 regarding maximum load current with and without heat sinks. If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to the "Inrush Current Resistivity" graphs on page 45 for more details. 44 Bulletin 700-SE Solid-State Relays Specifications, Continued Load Current vs. Ambient Temperature Characteristics 700-SE05... 700-SE10... With standard heat sink (700-S10) or aluminum plate measuring 100 mm x 100 mm x 2 mm (W x H x D) 700-SE20... With standard heat sink (700-S20) or aluminum plate measuring 300 mm x 300 mm x 2 mm (W x H x D) Without heat sink Load current (A) Load current (A) Without heat sink Load current (A) Without heat sink Ambient temperature (C) Ambient temperature (C) Ambient temperature (C) Inrush Current Resistivity 700-SE05... 700-SE10... 700-SE20... Inrush current (A. Peak) Inrush current (A. Peak) Energizing time (ms) Energizing time (ms) Inrush current (A. Peak) Energizing time (ms) Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2...5 seconds). Keep the inrush current to half the rated value if it occurs repetitively. Exceeding the non-repetitive inrush current will damage the SSR. 45 Bulletin 700-SE Solid-State Relays Approximate Dimensions Mounting Considerations Note: All units are in millimeters unless otherwise indicated. Dimensions are not intended for manufacturing purposes. 3.5 dia. hole 47.5 max. Terminal Arrangement/ Internal Connections (Top View) 37.5 max. 300.5 14.5 Input voltage 6.5 Two #250 (t = 0.8) (Faston tab or equivalent) 7.95 3 11.5 max. 3+ Input 4Input 1 Load 2 Load power supply Two #110 (t = 0.5) (Faston tab or equivalent)* 7.1 2.9 6 Mounting Holes Two, 3.5-dia. or M3 holes 300.2 The proper mounting orientation of the heat sink is so the heat fins run perpendicular to the floor (vertical) to maximize ventilation flow. If the fins do not run perpendicular to the floor, a 30% current derating is required. When attaching a heat sink to Bulletin 700-SE, apply heat conductive grease on the heat sink to maximize heat transfer between the SSR and the heat sink. Recommended types: Silicon based, Toshiba YG6240; Non-silicon based, AOS company type 53300. Tighten the SSR's panel/heat sink mounting screws to a torque of 0.78...0.98 Nm (6.9...8.7 lb.-in.) Heat Sinks Cat. No. 700-S10 Weight: Approx. 200 g 4.6 dia. hole Two, M3 holes Two, M4 holes Two, 3.2-dia. holes 900.4 35 30.50.3 44 max. 30 47 max. Two, 4.4-dia. or M4 holes Mounting Holes 47.6 77 max. 900.3 100 max. 5.6 5 6 51 max. 4.5 350.2 Cat. No. 700-S20 Weight: Approx. 400 g 4.6 dia. hole Two, M3 holes Two, M4 holes Two, 3.2-dia. holes Mounting Holes 35 30.50.3 71 max. 30 75 max. 900.4 Two, 4.4-dia. or M4 holes 47.6 77 max. 900.3 100 max. 5.6 28 5 100 max. 13 4.5 350.2 Tighten the heat sink's panel mounting screws (M4) to a torque of 0.59...0.98 Nm (5.22...8.67 lb.-in.). Basic Application Considerations R C + Input - SSR * Because the operation time of Bulletin 700-SE is extremely short, take measures to suppress noise induced between the input terminals. If generation of strong noise is expected, connect an external noise absorber such as an RC circuit. * Do not apply excessive force to the terminals. Exercise care when pulling or inserting the terminal clips. * Bulletin 700-SE has a built-in varistor to absorb most inrush/surge currents when operating AC inductive loads If additional suppression is required, connect an external varistor across the load device terminals. Select a varistor that meets the load voltage outlined in the table below. * For additional details on applying solid-state relays, refer to pub. 700-AT001A-EN-P, "Solid-State Relay Application Guide." Document available at www.theautomationbookstore.com. Load Voltage 100...120V AC 200...240V AC 380...480V AC Varistor Voltage 240...270 V 440...470 V 820...1000 V 1000 A min. Varistor Surge Resistance 46 |
Price & Availability of 700-SE05GNZ05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |